Tool Holders & Adapters - Kennametal (2024)

Filters

    View filters in

    Metric

    Inch

    Key Filters

    Workpiece Material

    Workpiece Material

    • P Steel (1791)

      • P0

        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(1787)

      • P1

        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(1787)

      • P2

        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(1787)

      • P3

        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(1787)

      • P4

        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(1787)

      • P5

        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(1791)

      • P6

        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(1791)

    • M Stainless Steel (1774)

      • M1

        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(1774)

      • M2

        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(1774)

      • M3

        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(1774)

    • K Cast Iron (1816)

      • K1

        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(1816)

      • K2

        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(1816)

      • K3

        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(1816)

    • N Non-Ferrous Materials (1745)

      • N1

        Wrought Aluminum (1742)

      • N2

        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(1739)

      • N3

        High-Silicon Aluminum Alloys Si >12.2%(1268)

      • N4

        Copper, Brass, Zinc-based on machinability index range of 70-100 (1745)

      • N5

        Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (1734)

      • N6

        Carbon, Graphite Composites, CFRP (1730)

      • N7

        MMC's (1564)

    • S High-Temp Alloys (1795)

      • S1

        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(1788)

      • S2

        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(1790)

      • S3

        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(1788)

      • S4

        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(1772)

    • H Hardened Materials (1554)

      • H1

        Hardened Materials 44-48 HRC(1554)

      • H2

        Hardened Materials 48-55 HRC(1554)

      • H3

        Hardened Materials 56-60 HRC(1534)

      • H4

        Hardened Materials >60 HRC(1308)

    • C CFRP Materials (1403)

      • C1

        CFRP, CFRP / CFRP (1399)

      • C2

        CFRP / Aluminium CFRP / Non-Ferrous (1260)

      • C3

        CFRP / Titanium CFRP / High Temp (5)

      • C4

        CFRP / Stainless Steel (5)

    Select First Choice

    • BR (2)

    • CN (40)

    • DE (158)

    • GB (92)

    • IN (46)

    • SG (26)

    • US (342)

    Applications

    Applications

    • Tool Holders & Adapters - Kennametal (1)Back Boring (1)

    • Tool Holders & Adapters - Kennametal (2)Chamfer Turning (61)

    • Tool Holders & Adapters - Kennametal (3)Convex Drilling (7)

    • Tool Holders & Adapters - Kennametal (4)Countersinking (3)

    • Tool Holders & Adapters - Kennametal (5)Cut-Off (45)

    • Tool Holders & Adapters - Kennametal (6)Deep Grooving (61)

    • Tool Holders & Adapters - Kennametal (7)Drilling (7)

    • Tool Holders & Adapters - Kennametal (8)Face Grooving (47)

    • Tool Holders & Adapters - Kennametal (9)Facing (1081)

    • Tool Holders & Adapters - Kennametal (10)Grooving (200)

    • Tool Holders & Adapters - Kennametal (11)ID Facing (260)

    • Tool Holders & Adapters - Kennametal (12)ID Grooving (111)

    • Tool Holders & Adapters - Kennametal (13)ID Thread Turning (175)

    • Tool Holders & Adapters - Kennametal (14)Inclined Entry Drilling (7)

    • Tool Holders & Adapters - Kennametal (15)Inclined Exit Drilling (7)

    • Tool Holders & Adapters - Kennametal (16)Multiple Direction Cutting (1210)

    • Tool Holders & Adapters - Kennametal (17)OD Thread Turning (191)

    • Tool Holders & Adapters - Kennametal (18)Plunge Turning (123)

    • Tool Holders & Adapters - Kennametal (19)Profiling (851)

    • Tool Holders & Adapters - Kennametal (20)TRN Boring (1008)

    • Tool Holders & Adapters - Kennametal (21)Threading (203)

    • Tool Holders & Adapters - Kennametal (22)Turning (1338)

    • Tool Holders & Adapters - Kennametal (23)X-Offset Drilling (7)

    Cutting Diameter

    Cutting Diameter

    • 0.19 in(1)

    • 0.25 in(1)

    • 0.375 in(1)

    • 0.625 in(1)

    • 0.687 in(1)

    • 0.75 in(1)

    • 0.814 in(1)

    • 0.875 in(1)

    • 0.937 in(1)

    • 1.0 in(1)

    • 1.063 in(1)

    • 1.125 in(1)

    • 1.143 in(1)

    • 1.22 in(1)

    • 1.25 in(1)

    • 1.375 in(1)

    • 1.5 in(1)

    • 1.625 in(1)

    • 1.75 in(1)

    • 1.875 in(1)

    • 2.0 in(1)

    Cutting Diameter MintoCutting Diameter Max

    Cutting Diameter

    Cutting Diameter

    • 4.825 mm(1)

    • 6.351 mm(1)

    • 9.525 mm(1)

    • 15.875 mm(1)

    • 17.45 mm(1)

    • 19.05 mm(1)

    • 20.651 mm(1)

    • 22.225 mm(1)

    • 23.8 mm(1)

    • 25.401 mm(1)

    • 27.0 mm(1)

    • 28.576 mm(1)

    • 29.0 mm(1)

    • 31.0 mm(1)

    • 31.75 mm(1)

    • 34.926 mm(1)

    • 38.1 mm(1)

    • 41.276 mm(1)

    • 44.45 mm(1)

    • 47.625 mm(1)

    • 50.801 mm(1)

    Cutting Diameter MintoCutting Diameter Max

    Type of Thread

    Type of Thread

    • 55 (105)

    • 60 (280)

    • ACME (230)

    • API (158)

    • API BUTTRESS (27)

    • API RD (161)

    • BSPT (78)

    • BSW (189)

    • BUTTRESS (175)

    • M (214)

    • NPT (162)

    • NPTF (78)

    • RD DIN 405 (100)

    • STUB ACME (184)

    • TR DIN 103 (100)

    • UN (253)

    • UNJ (162)

    Cutting Condition

    Cutting Condition

    • Heavily Interrupted Cut (1658)

    • Lightly Interrupted Cut (1684)

    • Smooth Cut (1687)

    • Varying Depth of Cut (1684)

    Maximum Hole Depth [L4]

    Maximum Hole Depth [L4]

    • 47.625 mm(1)

    • 52.401 mm(1)

    • 57.151 mm(1)

    • 61.901 mm(1)

    • 66.675 mm(1)

    • 71.45 mm(1)

    • 76.2 mm(1)

    • 81.0 mm(1)

    • 85.726 mm(1)

    • 87.0 mm(1)

    • 93.0 mm(1)

    • 95.25 mm(1)

    • 104.775 mm(1)

    • 114.301 mm(1)

    • 123.825 mm(1)

    • 133.35 mm(1)

    • 142.875 mm(1)

    • 152.4 mm(1)

    Maximum Hole Depth [L4] MintoMaximum Hole Depth [L4] Max

    Maximum Hole Depth [L4]

    Maximum Hole Depth [L4]

    • 1.875 in(1)

    • 2.063 in(1)

    • 2.25 in(1)

    • 2.437 in(1)

    • 2.625 in(1)

    • 2.813 in(1)

    • 3.0 in(1)

    • 3.189 in(1)

    • 3.375 in(1)

    • 3.426 in(1)

    • 3.661 in(1)

    • 3.75 in(1)

    • 4.125 in(1)

    • 4.5 in(1)

    • 4.875 in(1)

    • 5.25 in(1)

    • 5.625 in(1)

    • 6.0 in(1)

    Maximum Hole Depth [L4] MintoMaximum Hole Depth [L4] Max

    Reach

    Reach

    • 2.52 in(1)

    • 2.835 in(1)

    • 2.992 in(1)

    • 3.189 in(1)

    • 3.386 in(1)

    • 3.543 in(1)

    • 3.74 in(1)

    • 3.781 in(1)

    • 4.055 in(1)

    • 4.213 in(1)

    • 4.331 in(1)

    • 4.606 in(1)

    • 5.079 in(1)

    • 5.472 in(1)

    • 6.22 in(1)

    • 6.575 in(1)

    • 7.165 in(1)

    • 7.521 in(1)

    Reach MintoReach Max

    Reach

    Reach

    • 64.0 mm(1)

    • 72.0 mm(1)

    • 76.0 mm(1)

    • 81.0 mm(1)

    • 86.0 mm(1)

    • 90.0 mm(1)

    • 95.0 mm(1)

    • 96.0 mm(1)

    • 103.0 mm(1)

    • 107.0 mm(1)

    • 110.0 mm(1)

    • 117.0 mm(1)

    • 129.0 mm(1)

    • 139.0 mm(1)

    • 158.0 mm(1)

    • 167.0 mm(1)

    • 182.0 mm(1)

    • 191.0 mm(1)

    Reach MintoReach Max

    Tool Cutting Edge Angle

    Tool Cutting Edge Angle

    • 0.0 (2)

    • 45.0 (80)

    • 48.0 (19)

    • 49.683 (3)

    • 49.783 (3)

    • 50.0 (5)

    • 61.0 (2)

    • 62.233 (1)

    • 62.5 (23)

    • 63.0 (8)

    • 72.5 (7)

    • 75.0 (178)

    • 85.0 (4)

    • 90.0 (484)

    • 93.0 (454)

    • 95.0 (453)

    • 107.5 (113)

    Tool Cutting Edge Angle MintoTool Cutting Edge Angle Max

    Connection Style

    Connection Style

    • Cutoff Support Blade A1-A3 (3)

    • KM (1067)

    • PSC (171)

    • Straight-Cylindrical (3)

    Number of Flutes

    Number of Flutes

    • 1 (3)

    • 2 (18)

    Cutting Edges Per Insert

    Cutting Edges Per Insert

    • 0.0 (35)

    • 1.0 (1158)

    • 2.0 (1238)

    • 3.0 (330)

    • 4.0 (994)

    • 6.0 (157)

    • 8.0 (567)

    Cutting Edges Per Insert MintoCutting Edges Per Insert Max

    Internal Coolant Capability

    Internal Coolant Capability

    Over All Length [L]

    Over All Length [L]

    • 0.046 in(1)

    • 0.591 in(7)

    • 0.787 in(88)

    • 0.797 in(1)

    • 0.984 in(35)

    • 0.992 in(2)

    • 1.181 in(143)

    • 1.379 in(50)

    • 1.575 in(137)

    • 1.772 in(40)

    • 1.811 in(6)

    • 1.85 in(8)

    • 1.969 in(195)

    • 2.047 in(12)

    • 2.126 in(1)

    • 2.165 in(1)

    • 2.205 in(1)

    • 2.283 in(6)

    • 2.362 in(305)

    • 2.441 in(3)

    • 2.559 in(86)

    • 2.757 in(247)

    • 2.926 in(2)

    • 2.953 in(2)

    • 3.122 in(1)

    • 3.15 in(37)

    • 3.426 in(2)

    • 3.516 in(1)

    • 3.543 in(73)

    • 3.622 in(2)

    • 3.819 in(2)

    • 3.938 in(100)

    • 4.0 in(5)

    • 4.134 in(5)

    • 4.331 in(60)

    • 4.392 in(4)

    • 4.425 in(4)

    • 4.488 in(4)

    • 4.529 in(29)

    • 4.724 in(3)

    • 4.819 in(2)

    • 4.906 in(1)

    • 4.921 in(37)

    • 5.0 in(4)

    • 5.094 in(1)

    • 5.118 in(1)

    • 5.281 in(1)

    • 5.307 in(2)

    • 5.469 in(1)

    • 5.513 in(106)

    • 5.656 in(1)

    • 5.71 in(1)

    • 5.844 in(1)

    • 5.906 in(8)

    • 5.944 in(1)

    • 6.0 in(3)

    • 6.008 in(1)

    • 6.219 in(1)

    • 6.494 in(1)

    • 6.508 in(1)

    • 6.694 in(15)

    • 6.883 in(1)

    • 6.891 in(5)

    • 7.37 in(1)

    • 7.758 in(1)

    • 8.496 in(1)

    • 8.871 in(1)

    • 9.443 in(1)

    • 9.818 in(1)

    Over All Length [L] MintoOver All Length [L] Max

    Over All Length [L]

    Over All Length [L]

    • 1.175 mm(1)

    • 15.0 mm(7)

    • 20.0 mm(88)

    • 20.25 mm(1)

    • 25.0 mm(35)

    • 25.201 mm(2)

    • 30.0 mm(143)

    • 35.0 mm(50)

    • 40.0 mm(137)

    • 45.0 mm(40)

    • 46.0 mm(6)

    • 47.0 mm(8)

    • 50.0 mm(195)

    • 52.0 mm(12)

    • 54.0 mm(1)

    • 55.0 mm(1)

    • 56.0 mm(1)

    • 58.0 mm(6)

    • 60.0 mm(305)

    • 62.0 mm(3)

    • 65.0 mm(86)

    • 70.0 mm(247)

    • 74.3 mm(2)

    • 75.0 mm(2)

    • 79.301 mm(1)

    • 80.0 mm(37)

    • 87.0 mm(2)

    • 89.301 mm(1)

    • 90.0 mm(73)

    • 92.0 mm(2)

    • 97.0 mm(2)

    • 100.0 mm(100)

    • 101.601 mm(5)

    • 105.0 mm(5)

    • 110.0 mm(60)

    • 111.551 mm(4)

    • 112.4 mm(4)

    • 114.0 mm(4)

    • 115.0 mm(29)

    • 120.0 mm(3)

    • 122.4 mm(2)

    • 124.625 mm(1)

    • 125.0 mm(37)

    • 127.0 mm(4)

    • 129.4 mm(1)

    • 130.0 mm(1)

    • 134.15 mm(1)

    • 134.8 mm(2)

    • 138.925 mm(1)

    • 140.0 mm(106)

    • 143.675 mm(1)

    • 145.0 mm(1)

    • 148.425 mm(1)

    • 150.0 mm(8)

    • 150.951 mm(1)

    • 152.4 mm(3)

    • 152.6 mm(1)

    • 157.951 mm(1)

    • 164.951 mm(1)

    • 165.3 mm(1)

    • 170.0 mm(15)

    • 174.826 mm(1)

    • 175.0 mm(5)

    • 187.201 mm(1)

    • 197.05 mm(1)

    • 215.8 mm(1)

    • 225.326 mm(1)

    • 239.851 mm(1)

    • 249.375 mm(1)

    Over All Length [L] MintoOver All Length [L] Max

    Corner configuration

    Corner Radius

    Corner Radius

    • 0.0 in(45)

    • 0.001 in(115)

    • 0.002 in(329)

    • 0.003 in(248)

    • 0.004 in(1110)

    • 0.005 in(105)

    • 0.006 in(194)

    • 0.007 in(173)

    • 0.008 in(1143)

    • 0.01 in(170)

    • 0.011 in(115)

    • 0.012 in(115)

    • 0.014 in(308)

    • 0.015 in(22)

    • 0.016 in(1352)

    • 0.017 in(27)

    • 0.019 in(126)

    • 0.02 in(142)

    • 0.021 in(14)

    • 0.023 in(133)

    • 0.024 in(75)

    • 0.027 in(5)

    • 0.028 in(23)

    • 0.03 in(65)

    • 0.031 in(1525)

    • 0.033 in(11)

    • 0.034 in(4)

    • 0.035 in(126)

    • 0.037 in(31)

    • 0.038 in(4)

    • 0.039 in(154)

    • -0.039 in(35)

    • 0.041 in(8)

    • 0.047 in(1426)

    • 0.049 in(133)

    • 0.055 in(8)

    • 0.06 in(149)

    • 0.062 in(276)

    • 0.063 in(1197)

    • 0.069 in(133)

    • 0.078 in(84)

    • 0.079 in(130)

    • 0.08 in(4)

    • 0.089 in(126)

    • 0.094 in(230)

    • 0.095 in(483)

    • 0.098 in(44)

    • 0.099 in(2)

    • 0.125 in(77)

    • 0.126 in(165)

    • 0.157 in(41)

    • 0.188 in(2)

    • 0.197 in(4)

    • 0.237 in(7)

    • 0.25 in(15)

    • 0.313 in(2)

    • 0.315 in(6)

    • 0.375 in(2)

    • 0.394 in(6)

    • 0.492 in(6)

    • 0.5 in(2)

    • 0.63 in(5)

    Corner Radius MintoCorner Radius Max

    Corner Radius

    Corner Radius

    • 0.0 mm(45)

    • 0.025 mm(115)

    • 0.05 mm(329)

    • 0.076 mm(248)

    • 0.1 mm(1110)

    • 0.125 mm(105)

    • 0.151 mm(194)

    • 0.176 mm(173)

    • 0.2 mm(1143)

    • 0.225 mm(103)

    • 0.25 mm(167)

    • 0.275 mm(115)

    • 0.301 mm(115)

    • 0.325 mm(149)

    • 0.351 mm(285)

    • 0.375 mm(22)

    • 0.4 mm(1352)

    • 0.426 mm(27)

    • 0.45 mm(126)

    • 0.476 mm(40)

    • 0.5 mm(142)

    • 0.525 mm(14)

    • 0.576 mm(133)

    • 0.601 mm(75)

    • 0.65 mm(5)

    • 0.701 mm(23)

    • 0.75 mm(65)

    • 0.775 mm(133)

    • 0.8 mm(1392)

    • 0.826 mm(11)

    • 0.851 mm(4)

    • 0.9 mm(126)

    • 0.925 mm(31)

    • 0.976 mm(4)

    • 1.0 mm(154)

    • -1.0 mm(35)

    • 1.05 mm(8)

    • 1.201 mm(1426)

    • 1.25 mm(133)

    • 1.401 mm(8)

    • 1.5 mm(142)

    • 1.526 mm(16)

    • 1.576 mm(276)

    • 1.6 mm(1197)

    • 1.75 mm(133)

    • 1.975 mm(84)

    • 2.0 mm(130)

    • 2.025 mm(4)

    • 2.25 mm(126)

    • 2.375 mm(230)

    • 2.401 mm(483)

    • 2.5 mm(44)

    • 2.526 mm(2)

    • 3.176 mm(77)

    • 3.2 mm(165)

    • 4.0 mm(41)

    • 4.775 mm(2)

    • 5.0 mm(4)

    • 6.0 mm(7)

    • 6.351 mm(15)

    • 7.95 mm(2)

    • 8.0 mm(6)

    • 9.525 mm(2)

    • 10.0 mm(6)

    • 12.5 mm(6)

    • 12.701 mm(2)

    • 16.0 mm(5)

    Corner Radius MintoCorner Radius Max

    Corner Chamfer

    Corner Chamfer

    • 0.0 mm(2)

    Corner Chamfer MintoCorner Chamfer Max

    Corner Chamfer

    Corner Chamfer

    • 0.0 in(2)

    Corner Chamfer MintoCorner Chamfer Max

    Application

    Minimum Depth of Cut

    Minimum Depth of Cut

    Minimum Feed

    Minimum Feed

    Grade Of Cutting Tool

    Grade Of Cutting Tool

    • 13E (800)

    • 241 (192)

    • AC5 (12)

    • ALO (6)

    • C2 (6)

    • C3 (6)

    • CBN6 (6)

    • CG4 (6)

    • CG5 (53)

    • CG6 (18)

    • CL4 (553)

    • CM1 (53)

    • CM2 (786)

    • CM3 (598)

    • CM4 (370)

    • CM5 (15)

    • CPD1 (6)

    • CPX (790)

    • CS5 (18)

    • CW2 (380)

    • CW2015 (724)

    • CW3020 (15)

    • CW5025 (803)

    • GH1 (43)

    • GX (400)

    • HCK10 (88)

    • HCK20 (23)

    • HCM15 (3)

    • HK1500 (674)

    • HK35 (74)

    • HT2 (582)

    • HTX (399)

    • HWK10 (5)

    • HWK15 (91)

    • K00326 (44)

    • K00331 (39)

    • K060 (444)

    • K090 (894)

    • K1 (326)

    • K1010P (43)

    • K1025 (4)

    • K10M (1076)

    • K10P (967)

    • K10U (924)

    • K15 (55)

    • K15U (915)

    • K20K (1065)

    • K21 (425)

    • K25M (962)

    • K25P (950)

    • K2885 (133)

    • K313 (1558)

    • K35P (615)

    • K420 (961)

    • K45 (520)

    • K4H (108)

    • K6 (10)

    • K68 (1456)

    • K8735 (44)

    • KB1340 (336)

    • KB1345 (589)

    • KB1610 (751)

    • KB1625 (613)

    • KB1630 (642)

    • KB5610 (651)

    • KB5625 (772)

    • KB5630 (528)

    • KB9610 (935)

    • KB9640 (422)

    • KBH10 (857)

    • KBH10B (562)

    • KBH20 (1018)

    • KBH20B (562)

    • KBK35 (200)

    • KBK45 (11)

    • KC210 (681)

    • KC250 (805)

    • KC5010 (1695)

    • KC5020P (105)

    • KC5025 (1687)

    • KC5035 (2)

    • KC5410 (1414)

    • KC5510 (997)

    • KC5525 (656)

    • KC710 (451)

    • KC7140 (18)

    • KC720 (1315)

    • KC7215 (18)

    • KC722 (409)

    • KC7225 (18)

    • KC730 (1464)

    • KC7310 (1069)

    • KC732 (1085)

    • KC7815 (18)

    • KC7820 (12)

    • KC7845 (6)

    • KC7935 (18)

    • KC8050 (1417)

    • KC810 (1540)

    • KC850 (1599)

    • KC9010 (1171)

    • KC9025 (1382)

    • KC910 (1411)

    • KC9105 (1266)

    • KC9110 (1617)

    • KC9120 (1349)

    • KC9125 (1442)

    • KC9125RR (86)

    • KC9140 (1053)

    • KC9145 (945)

    • KC9210 (159)

    • KC9215 (1006)

    • KC9225 (1347)

    • KC9240 (1346)

    • KC9240NEW (1332)

    • KC9245 (1007)

    • KC9315 (1380)

    • KC9320 (1460)

    • KC9325 (1214)

    • KC935 (1551)

    • KC950 (1414)

    • KC990 (1253)

    • KCD25 (448)

    • KCK05 (1344)

    • KCK05B (1136)

    • KCK15 (1260)

    • KCK15B (1326)

    • KCK20 (1480)

    • KCK20B (1502)

    • KCM15 (1283)

    • KCM15B (1198)

    • KCM25 (1379)

    • KCM25B (1281)

    • KCM25S (71)

    • KCM35 (1159)

    • KCM35B (825)

    • KCMS35 (15)

    • KCP05 (1222)

    • KCP05B (902)

    • KCP10 (1435)

    • KCP10B (1561)

    • KCP15 (43)

    • KCP20S (71)

    • KCP25 (1453)

    • KCP25B (1582)

    • KCP25C (1432)

    • KCP30 (1335)

    • KCP30B (977)

    • KCP40 (912)

    • KCP40B (1041)

    • KCPK05 (1017)

    • KCPK10 (18)

    • KCS10 (501)

    • KCS10B (1276)

    • KCS25S (71)

    • KCU10 (1619)

    • KCU10B (1599)

    • KCU25 (1585)

    • KCU25B (1567)

    • KCU40 (18)

    • KD050 (742)

    • KD081 (725)

    • KD100 (646)

    • KD105 (61)

    • KD120 (755)

    • KD1400 (731)

    • KD1405 (505)

    • KD1425 (882)

    • KM1 (384)

    • KMF (213)

    • KMS (11)

    • KN10S (89)

    • KS15 (236)

    • KT1120 (209)

    • KT125 (799)

    • KT150 (564)

    • KT175 (1035)

    • KT315 (1378)

    • KT325 (615)

    • KT5020 (83)

    • KTP10 (1038)

    • KTP25S (805)

    • KU10 (220)

    • KU10T (1276)

    • KU25T (217)

    • KU30T (1469)

    • KU40D (18)

    • KY1310 (626)

    • KY1320 (919)

    • KY1525 (15)

    • KY1540 (512)

    • KY1615 (855)

    • KY2000 (562)

    • KY2100 (417)

    • KY2200 (3)

    • KY3000 (1001)

    • KY3400 (746)

    • KY3500 (976)

    • KY4000 (398)

    • KY4300 (447)

    • KY4400 (894)

    • KYHK15B (904)

    • KYK10 (531)

    • KYK25 (706)

    • KYK35 (959)

    • KYS25 (474)

    • KYS30 (551)

    • MC2 (20)

    • MC3 (4)

    • NL200 (351)

    • NL250 (984)

    • NL300 (730)

    • NL400 (393)

    • NL920 (791)

    • P25 (359)

    • PB100 (250)

    • PB170 (226)

    • PB250 (269)

    • PB300 (184)

    • PD100 (87)

    • PD50 (63)

    • PN120 (16)

    • PS5 (402)

    • SP0819 (666)

    • SP0A00 (71)

    • SP0G00 (8)

    • SP0NTA (2)

    • SP0PW3 (19)

    • SP3019 (565)

    • SP4019 (663)

    • SP4036 (54)

    • SP4066 (19)

    • SP4093 (54)

    • SP61EJ (82)

    • SPADAP (113)

    • SPB400 (10)

    • SPMQMA (12)

    • SPN3W1 (24)

    • SPN4W2 (40)

    • SPSREJ (24)

    • THM (700)

    • THM-X (466)

    • THMF-X (277)

    • TN10P (1166)

    • TN10U (856)

    • TN15M (1015)

    • TN15U (824)

    • TN2000 (734)

    • TN20K (1052)

    • TN20P (1115)

    • TN30M (1066)

    • TN30P (805)

    • TN4000 (676)

    • TN5015 (941)

    • TN5020 (876)

    • TN5105 (794)

    • TN5120 (996)

    • TN6010 (766)

    • TN6025 (861)

    • TN7 (6)

    • TN7005 (687)

    • TN7010 (1032)

    • TN7015 (1067)

    • TN7025 (1060)

    • TN7035 (858)

    • TN7105 (647)

    • TN7110 (1136)

    • TN7115 (1029)

    • TN7125 (944)

    • TN7135 (864)

    • TN8025 (977)

    • TTI15 (486)

    • TTM (52)

    • TTM09 (215)

    • TTR (407)

    • TTR-X (40)

    • TTS (533)

    • TTX (482)

    • W00160 (7)

    • W00162 (19)

    • W00342 (113)

    • WBH10C (753)

    • WBH10P (515)

    • WBH10U (687)

    • WBH20P (759)

    • WBH25P (630)

    • WBH25U (629)

    • WBH30P (515)

    • WBK40U (310)

    • WBK45U (565)

    • WDN00U (389)

    • WDN10U (6)

    • WDN25U (689)

    • WK05CT (1044)

    • WK15CT (675)

    • WK20CT (1188)

    • WM15CT (1156)

    • WM25CT (1173)

    • WM35CT (909)

    • WP05CT (251)

    • WP15CT (1218)

    • WP20TT (98)

    • WP25CT (1244)

    • WP35CT (1106)

    • WS10PT (1000)

    • WS25PT (1006)

    • WU05PT (115)

    • WU10HT (1071)

    • WU10PT (836)

    • WU25PT (800)

    • X00511 (192)

    • X00580 (192)

    • X00581 (192)

    • X00582 (192)

    • X00583 (192)

    • X00584 (192)

    • X00585 (192)

    • X00586 (192)

    • X00591 (192)

    • X00592 (192)

    • X00593 (192)

    • X00594 (192)

    • X00596 (192)

    • X00597 (192)

    • X00599 (192)

    • YY3A00 (6)

    • YY72VD (2)

    Hand Of Tool

    Hand Of Tool

    • L (557)

    • N (71)

    • N - Neutral (3)

    • R (613)

    Wiper Insert

    Wiper Insert

    • N (1810)

    • Y (714)

    Drill Type

    Drill Type

    • 86-01 (18)

    • 86-09 (3)

    Bore Diameter [D1]

    Bore Diameter [D1]

    • 0.325 mm(1)

    • 1.0 mm(4)

    • 1.5 mm(3)

    • 1.576 mm(1)

    • 1.6 mm(2)

    • 2.0 mm(5)

    • 2.375 mm(3)

    • 2.5 mm(3)

    • 3.0 mm(14)

    • 3.176 mm(13)

    • 3.5 mm(3)

    • 3.575 mm(5)

    • 3.975 mm(7)

    • 4.0 mm(15)

    • 4.275 mm(9)

    • 4.5 mm(7)

    • 4.75 mm(2)

    • 4.775 mm(12)

    • 4.926 mm(10)

    • 5.0 mm(15)

    • 5.5 mm(6)

    • 5.551 mm(9)

    • 5.601 mm(7)

    • 6.0 mm(28)

    • 6.351 mm(17)

    • 6.476 mm(12)

    • 6.5 mm(2)

    • 7.0 mm(21)

    • 7.15 mm(9)

    • 7.5 mm(1)

    • 7.875 mm(1)

    • 7.95 mm(14)

    • 8.0 mm(26)

    • 8.076 mm(9)

    • 8.201 mm(6)

    • 8.5 mm(1)

    • 8.725 mm(9)

    • 9.0 mm(18)

    • 9.326 mm(10)

    • 9.451 mm(1)

    • 9.5 mm(1)

    • 9.525 mm(15)

    • 9.675 mm(10)

    • 10.0 mm(25)

    • 10.326 mm(9)

    • 10.9 mm(7)

    • 11.0 mm(14)

    • 11.101 mm(2)

    • 11.125 mm(12)

    • 11.9 mm(7)

    • 12.0 mm(20)

    • 12.201 mm(7)

    • 12.55 mm(1)

    • 12.701 mm(14)

    • 13.0 mm(10)

    • 13.5 mm(5)

    • 13.775 mm(3)

    • 14.0 mm(15)

    • 14.3 mm(13)

    • 14.976 mm(4)

    • 15.0 mm(8)

    • 15.076 mm(5)

    • 15.875 mm(13)

    • 16.0 mm(17)

    • 16.55 mm(3)

    • 16.675 mm(3)

    • 17.0 mm(5)

    • 17.45 mm(1)

    • 17.475 mm(4)

    • 17.7 mm(2)

    • 18.0 mm(10)

    • 18.25 mm(3)

    • 19.0 mm(5)

    • 19.05 mm(8)

    • 19.3 mm(1)

    • 19.85 mm(2)

    • 20.0 mm(11)

    • 20.326 mm(1)

    • 20.625 mm(1)

    • 20.651 mm(3)

    • 21.0 mm(2)

    • 21.425 mm(1)

    • 22.0 mm(5)

    • 22.225 mm(6)

    • 23.0 mm(2)

    • 23.026 mm(1)

    • 23.826 mm(1)

    • 24.0 mm(2)

    • 24.6 mm(1)

    • 25.0 mm(6)

    • 25.401 mm(5)

    • 26.0 mm(2)

    • 17463.0 mm(1)

    Bore Diameter [D1] MintoBore Diameter [D1] Max

    Bore Diameter [D1]

    Bore Diameter [D1]

    • 0.014 in(1)

    • 0.039 in(4)

    • 0.06 in(3)

    • 0.062 in(1)

    • 0.063 in(2)

    • 0.079 in(5)

    • 0.094 in(3)

    • 0.098 in(3)

    • 0.119 in(14)

    • 0.125 in(13)

    • 0.138 in(3)

    • 0.142 in(5)

    • 0.156 in(7)

    • 0.157 in(15)

    • 0.168 in(9)

    • 0.177 in(7)

    • 0.187 in(2)

    • 0.188 in(12)

    • 0.194 in(10)

    • 0.197 in(15)

    • 0.217 in(6)

    • 0.219 in(9)

    • 0.221 in(7)

    • 0.237 in(28)

    • 0.25 in(17)

    • 0.255 in(12)

    • 0.256 in(2)

    • 0.276 in(21)

    • 0.281 in(9)

    • 0.295 in(1)

    • 0.31 in(1)

    • 0.313 in(14)

    • 0.315 in(26)

    • 0.318 in(9)

    • 0.323 in(6)

    • 0.335 in(1)

    • 0.345 in(9)

    • 0.354 in(18)

    • 0.367 in(10)

    • 0.372 in(1)

    • 0.374 in(1)

    • 0.375 in(15)

    • 0.381 in(10)

    • 0.394 in(25)

    • 0.408 in(9)

    • 0.429 in(7)

    • 0.433 in(14)

    • 0.437 in(2)

    • 0.438 in(12)

    • 0.47 in(7)

    • 0.473 in(20)

    • 0.48 in(7)

    • 0.494 in(1)

    • 0.5 in(14)

    • 0.512 in(10)

    • 0.531 in(5)

    • 0.542 in(3)

    • 0.551 in(15)

    • 0.564 in(13)

    • 0.59 in(4)

    • 0.591 in(8)

    • 0.594 in(5)

    • 0.625 in(13)

    • 0.63 in(17)

    • 0.652 in(3)

    • 0.656 in(3)

    • 0.669 in(5)

    • 0.687 in(1)

    • 0.689 in(4)

    • 0.698 in(2)

    • 0.709 in(10)

    • 0.719 in(3)

    • 0.748 in(5)

    • 0.75 in(8)

    • 0.76 in(1)

    • 0.781 in(2)

    • 0.787 in(11)

    • 0.8 in(1)

    • 0.812 in(1)

    • 0.814 in(3)

    • 0.828 in(2)

    • 0.844 in(1)

    • 0.866 in(5)

    • 0.875 in(6)

    • 0.906 in(2)

    • 0.907 in(1)

    • 0.939 in(1)

    • 0.946 in(2)

    • 0.969 in(1)

    • 0.984 in(6)

    • 1.0 in(5)

    • 1.024 in(2)

    • 687.52 in(1)

    Bore Diameter [D1] MintoBore Diameter [D1] Max

    F Dimension

    F Dimension

    • 0.0 mm(67)

    • 1.701 mm(1)

    • 2.0 mm(2)

    • 4.0 mm(1)

    • 5.0 mm(2)

    • 5.75 mm(3)

    • 5.801 mm(3)

    • 6.0 mm(1)

    • 7.0 mm(15)

    • 7.351 mm(3)

    • 7.525 mm(3)

    • 8.0 mm(35)

    • 9.0 mm(19)

    • 10.0 mm(69)

    • 11.0 mm(35)

    • 12.0 mm(2)

    • 12.5 mm(37)

    • 13.0 mm(39)

    • 14.0 mm(3)

    • 16.0 mm(39)

    • 17.0 mm(123)

    • 18.0 mm(2)

    • 22.0 mm(163)

    • 24.0 mm(13)

    • 25.3 mm(1)

    • 27.0 mm(173)

    • 28.5 mm(2)

    • 30.0 mm(18)

    • 32.0 mm(3)

    • 35.0 mm(107)

    • 38.0 mm(22)

    • 43.0 mm(99)

    • 45.0 mm(21)

    • 48.0 mm(17)

    • 53.0 mm(49)

    • 58.0 mm(8)

    • 59.0 mm(2)

    • 63.0 mm(6)

    F Dimension MintoF Dimension Max

    F Dimension

    F Dimension

    • 0.0 in(67)

    • 0.067 in(1)

    • 0.079 in(2)

    • 0.157 in(1)

    • 0.197 in(2)

    • 0.226 in(3)

    • 0.228 in(3)

    • 0.237 in(1)

    • 0.276 in(15)

    • 0.289 in(3)

    • 0.296 in(3)

    • 0.315 in(35)

    • 0.354 in(19)

    • 0.394 in(69)

    • 0.433 in(35)

    • 0.473 in(2)

    • 0.492 in(37)

    • 0.512 in(39)

    • 0.551 in(3)

    • 0.63 in(39)

    • 0.669 in(123)

    • 0.709 in(2)

    • 0.866 in(163)

    • 0.946 in(13)

    • 0.996 in(1)

    • 1.063 in(173)

    • 1.122 in(2)

    • 1.181 in(18)

    • 1.26 in(3)

    • 1.379 in(107)

    • 1.496 in(22)

    • 1.693 in(99)

    • 1.772 in(21)

    • 1.891 in(17)

    • 2.087 in(49)

    • 2.283 in(8)

    • 2.323 in(2)

    • 2.48 in(6)

    F Dimension MintoF Dimension Max

    Minimum Axial Groove Diameter

    Minimum Axial Groove Diameter

    • 0.0 mm(62)

    • -1.0 mm(23)

    • 11.101 mm(3)

    • 11.15 mm(3)

    • 13.0 mm(15)

    • 14.25 mm(3)

    • 16.0 mm(19)

    • 18.5 mm(5)

    • 20.0 mm(32)

    • 24.0 mm(2)

    • 24.5 mm(1)

    • 25.0 mm(44)

    • 32.0 mm(114)

    • 33.0 mm(3)

    • 33.5 mm(1)

    • 34.0 mm(8)

    • 38.5 mm(4)

    • 40.0 mm(120)

    • 41.301 mm(26)

    • 44.0 mm(18)

    • 47.6 mm(26)

    • 48.0 mm(3)

    • 48.5 mm(3)

    • 50.0 mm(120)

    • 52.5 mm(1)

    • 53.0 mm(1)

    • 54.0 mm(51)

    • 56.625 mm(20)

    • 57.2 mm(16)

    • 60.0 mm(2)

    • 62.0 mm(3)

    • 63.0 mm(50)

    • 64.0 mm(4)

    • 65.0 mm(6)

    • 65.5 mm(1)

    • 66.0 mm(1)

    • 70.0 mm(54)

    • 74.0 mm(4)

    • 80.0 mm(65)

    • 81.0 mm(3)

    • 86.0 mm(129)

    • 88.9 mm(46)

    • 90.0 mm(13)

    • 94.0 mm(2)

    • 100.0 mm(60)

    • 104.0 mm(2)

    • 106.0 mm(71)

    • 110.0 mm(58)

    • 118.0 mm(2)

    • 120.0 mm(36)

    • 125.0 mm(21)

    • 139.701 mm(26)

    • 150.0 mm(1)

    • 165.0 mm(1)

    • 174.601 mm(26)

    • 209.601 mm(16)

    • 215.0 mm(2)

    • 222.3 mm(16)

    • 223.0 mm(2)

    • 510.0 mm(2)

    Minimum Axial Groove Diameter MintoMinimum Axial Groove Diameter Max

    Minimum Axial Groove Diameter

    Minimum Axial Groove Diameter

    • 0.0 in(62)

    • -0.039 in(23)

    • 0.437 in(3)

    • 0.439 in(3)

    • 0.512 in(15)

    • 0.561 in(3)

    • 0.63 in(19)

    • 0.728 in(5)

    • 0.787 in(32)

    • 0.946 in(2)

    • 0.965 in(1)

    • 0.984 in(44)

    • 1.26 in(114)

    • 1.299 in(3)

    • 1.319 in(1)

    • 1.339 in(8)

    • 1.516 in(4)

    • 1.575 in(120)

    • 1.627 in(26)

    • 1.732 in(18)

    • 1.874 in(26)

    • 1.891 in(3)

    • 1.909 in(3)

    • 1.969 in(120)

    • 2.067 in(1)

    • 2.087 in(1)

    • 2.126 in(51)

    • 2.229 in(20)

    • 2.253 in(16)

    • 2.362 in(2)

    • 2.441 in(3)

    • 2.48 in(50)

    • 2.52 in(4)

    • 2.559 in(6)

    • 2.579 in(1)

    • 2.598 in(1)

    • 2.757 in(54)

    • 2.914 in(4)

    • 3.15 in(65)

    • 3.189 in(3)

    • 3.386 in(129)

    • 3.5 in(46)

    • 3.543 in(13)

    • 3.701 in(2)

    • 3.938 in(60)

    • 4.094 in(2)

    • 4.173 in(71)

    • 4.331 in(58)

    • 4.646 in(2)

    • 4.724 in(36)

    • 4.921 in(21)

    • 5.5 in(26)

    • 5.906 in(1)

    • 6.496 in(1)

    • 6.875 in(26)

    • 8.252 in(16)

    • 8.465 in(2)

    • 8.752 in(16)

    • 8.78 in(2)

    • 20.079 in(2)

    Minimum Axial Groove Diameter MintoMinimum Axial Groove Diameter Max

    Maximum Axial Groove Diameter

    Maximum Axial Groove Diameter

    • -0.039 in(35)

    • 1.024 in(2)

    • 1.063 in(2)

    • 1.26 in(10)

    • 393.661 in(184)

    Maximum Axial Groove Diameter MintoMaximum Axial Groove Diameter Max

    Maximum Axial Groove Diameter

    Maximum Axial Groove Diameter

    • -1.0 mm(35)

    • 26.0 mm(2)

    • 27.0 mm(2)

    • 32.0 mm(10)

    • 9999.0 mm(184)

    Maximum Axial Groove Diameter MintoMaximum Axial Groove Diameter Max

    Countersunk Angle

    Countersunk Angle

    • 50.0 (5)

    Countersunk Angle MintoCountersunk Angle Max

    Cutting Direction

    Cutting Direction

    • B (302)

    • E (325)

    • P (3)

    • S (592)

    Rake Angle Style

    Rake Angle Style

    • DOUBLE NEGATIVE (670)

    • DOUBLE POSITIVE (4)

    • NEGATIVE-ZERO (118)

    • NEUTRAL (ZERO) (350)

    • POSITIVE-NEGATIVE (1)

    • POSITIVE-ZERO (40)

    Maximum Bore Depth

    Maximum Bore Depth

    • 1.379 in(30)

    • 1.385 in(5)

    • 1.387 in(2)

    • 1.417 in(3)

    • 1.43 in(1)

    • 1.508 in(3)

    • 1.575 in(82)

    • 1.614 in(6)

    • 1.655 in(9)

    • 1.661 in(7)

    • 1.665 in(2)

    • 1.701 in(2)

    • 1.772 in(19)

    • 1.811 in(3)

    • 1.85 in(2)

    • 1.891 in(2)

    • 1.938 in(2)

    • 1.969 in(113)

    • 1.986 in(2)

    • 2.008 in(1)

    • 2.039 in(3)

    • 2.047 in(10)

    • 2.126 in(1)

    • 2.165 in(1)

    • 2.169 in(15)

    • 2.205 in(7)

    • 2.209 in(11)

    • 2.211 in(2)

    • 2.283 in(4)

    • 2.362 in(180)

    • 2.382 in(4)

    • 2.441 in(4)

    • 2.444 in(3)

    • 2.512 in(2)

    • 2.52 in(5)

    • 2.525 in(1)

    • 2.559 in(50)

    • 2.598 in(5)

    • 2.638 in(10)

    • 2.757 in(134)

    • 2.761 in(2)

    • 2.769 in(4)

    • 2.77 in(1)

    • 2.775 in(6)

    • 2.835 in(2)

    • 2.914 in(3)

    • 2.953 in(3)

    • 2.955 in(17)

    • 2.993 in(8)

    • 3.037 in(4)

    • 3.044 in(8)

    • 3.132 in(1)

    • 3.15 in(19)

    • 3.152 in(2)

    • 3.2 in(4)

    • 3.281 in(2)

    • 3.307 in(4)

    • 3.434 in(8)

    • 3.446 in(4)

    • 3.465 in(6)

    • 3.469 in(2)

    • 3.473 in(8)

    • 3.476 in(4)

    • 3.477 in(6)

    • 3.48 in(1)

    • 3.485 in(2)

    • 3.593 in(4)

    • 3.594 in(2)

    • 3.701 in(2)

    • 3.781 in(12)

    • 3.789 in(8)

    • 3.907 in(1)

    • 3.91 in(2)

    • 3.938 in(43)

    • 4.11 in(4)

    • 4.158 in(2)

    • 4.339 in(1)

    • 4.37 in(1)

    • 4.371 in(1)

    • 4.412 in(12)

    • 4.418 in(2)

    • 4.42 in(12)

    • 4.449 in(3)

    • 4.464 in(1)

    • 4.485 in(3)

    • 4.488 in(4)

    • 4.49 in(7)

    • 4.493 in(2)

    • 4.529 in(33)

    • 4.532 in(2)

    • 4.612 in(10)

    • 4.621 in(1)

    • 4.646 in(2)

    • 4.686 in(4)

    • 4.724 in(3)

    • 4.726 in(4)

    • 4.738 in(13)

    • 5.513 in(4)

    • 5.671 in(6)

    • 5.883 in(8)

    • 5.906 in(5)

    • 5.984 in(5)

    Maximum Bore Depth MintoMaximum Bore Depth Max

    Maximum Bore Depth

    Maximum Bore Depth

    • 35.0 mm(30)

    • 35.15 mm(5)

    • 35.2 mm(2)

    • 36.0 mm(3)

    • 36.325 mm(1)

    • 38.301 mm(3)

    • 40.0 mm(82)

    • 41.0 mm(6)

    • 42.0 mm(7)

    • 42.026 mm(2)

    • 42.2 mm(7)

    • 42.276 mm(2)

    • 43.2 mm(2)

    • 45.0 mm(19)

    • 46.0 mm(3)

    • 47.0 mm(2)

    • 48.0 mm(2)

    • 49.225 mm(2)

    • 50.0 mm(113)

    • 50.45 mm(2)

    • 51.0 mm(1)

    • 51.801 mm(3)

    • 52.0 mm(10)

    • 54.0 mm(1)

    • 55.0 mm(1)

    • 55.1 mm(15)

    • 56.0 mm(7)

    • 56.1 mm(11)

    • 56.151 mm(2)

    • 58.0 mm(4)

    • 60.0 mm(180)

    • 60.475 mm(4)

    • 62.0 mm(4)

    • 62.075 mm(3)

    • 63.801 mm(2)

    • 64.0 mm(5)

    • 64.125 mm(1)

    • 65.0 mm(50)

    • 66.0 mm(5)

    • 67.0 mm(10)

    • 70.0 mm(122)

    • 70.025 mm(12)

    • 70.101 mm(2)

    • 70.325 mm(4)

    • 70.351 mm(1)

    • 70.476 mm(6)

    • 72.0 mm(2)

    • 74.0 mm(3)

    • 75.0 mm(3)

    • 75.05 mm(17)

    • 76.025 mm(8)

    • 77.15 mm(4)

    • 77.325 mm(8)

    • 79.551 mm(1)

    • 80.0 mm(19)

    • 80.051 mm(2)

    • 81.25 mm(4)

    • 83.301 mm(2)

    • 84.0 mm(4)

    • 87.226 mm(8)

    • 87.5 mm(4)

    • 88.0 mm(6)

    • 88.101 mm(2)

    • 88.226 mm(8)

    • 88.301 mm(4)

    • 88.325 mm(6)

    • 88.4 mm(1)

    • 88.525 mm(2)

    • 91.25 mm(4)

    • 91.275 mm(2)

    • 94.0 mm(2)

    • 96.025 mm(12)

    • 96.25 mm(8)

    • 99.25 mm(1)

    • 99.325 mm(2)

    • 100.0 mm(43)

    • 104.4 mm(4)

    • 105.601 mm(2)

    • 110.2 mm(1)

    • 111.0 mm(1)

    • 111.025 mm(1)

    • 112.075 mm(12)

    • 112.226 mm(2)

    • 112.275 mm(12)

    • 113.0 mm(3)

    • 113.375 mm(1)

    • 113.926 mm(3)

    • 114.0 mm(4)

    • 114.051 mm(7)

    • 114.125 mm(2)

    • 115.0 mm(33)

    • 115.101 mm(2)

    • 117.15 mm(10)

    • 117.375 mm(1)

    • 118.0 mm(2)

    • 119.0 mm(4)

    • 120.0 mm(3)

    • 120.025 mm(4)

    • 120.351 mm(13)

    • 140.0 mm(4)

    • 144.05 mm(6)

    • 149.4 mm(8)

    • 150.0 mm(5)

    • 152.0 mm(5)

    Maximum Bore Depth MintoMaximum Bore Depth Max

    Boring Bar Material

    Boring Bar Material

    • C (7)

    • S (524)

    Front-End

    Adapter Front-End

    Adapter Front-End

    • BOEING TAPER FLANGE (8)

    • BORING BAR ADAPTER (95)

    • CARTRIDGE MOUNT (71)

    • COMBI SHELL ADAPTER (84)

    • CUTOFF SUPPORT BLADE (28)

    • DA COLLET CHUCK (27)

    • DRILL CHUCK ADAPTER (15)

    • DRILL SHANK 2 FLATS (22)

    • END MILL ADAPTER (429)

    • ER COLLET CHUCK (323)

    • EXTENSION (24)

    • FM ADAPTER (5)

    • HSK MODULAR ADAPTER (12)

    • HTS MODULAR ADAPTER (2)

    • HYDRAULIC CHUCK (361)

    • HYDRAULIC CHUCK-HIGH TORQUE (61)

    • HYDRAULIC CHUCK-SLIM LINE (103)

    • KM MODULAR ADAPTER (519)

    • KM MODULAR ADAPTER-4 UNITS (2)

    • MILLING CHUCK (57)

    • MODULAR ADAPTER (7)

    • RC TAP ADAPTER (58)

    • RC TAP CHUCK ADAPTER-SOLID (18)

    • RC TAP CHUCK ADAPTER-T & C (22)

    • REDUCER (53)

    • SCREW-ON ADAPTER (199)

    • SHELL MILL ADAPTER (465)

    • SHRINK FIT ADAPTER (593)

    • SHRINK FIT SAFE-LOCK ADAPTER (59)

    • SLOTTING CUTTER ADAPTER (21)

    • SQUARE SHANK ADAPTER (104)

    • SQUARE SHANK ADAPTER-2 SLOTS (2)

    • SQUARE SHANK ADAPTER-4 SLOTS (1)

    • STRAIGHT SHANK ADAPTER (13)

    • TAP ADAPTER (35)

    • TAP CHUCK ADAPTER (10)

    • TAP COLLET CHUCK (7)

    • TUNABLE SHELL MILL ADAPTER (55)

    • WHISTLE DRIVE ADAPTER (22)

    • WHISTLE NOTCH ADAPTER (203)

    Clamp Style

    Clamp Style

    • C (28)

    • D (257)

    • M (503)

    • N (252)

    • P (342)

    • S (414)

    • W (2)

    • X (3)

    • Y (36)

    Cutting Width

    Cutting Width

    • 0.02 in(49)

    • 0.031 in(49)

    • 0.035 in(49)

    • 0.039 in(133)

    • 0.041 in(49)

    • 0.047 in(133)

    • 0.055 in(49)

    • 0.058 in(49)

    • 0.06 in(140)

    • 0.061 in(1)

    • 0.062 in(133)

    • 0.063 in(1)

    • 0.067 in(49)

    • 0.069 in(133)

    • 0.073 in(84)

    • 0.077 in(49)

    • 0.078 in(84)

    • 0.079 in(141)

    • 0.084 in(8)

    • 0.088 in(135)

    • 0.089 in(93)

    • 0.094 in(43)

    • 0.095 in(136)

    • 0.097 in(87)

    • 0.098 in(136)

    • 0.104 in(3)

    • 0.105 in(84)

    • 0.108 in(133)

    • 0.11 in(84)

    • 0.119 in(184)

    • 0.12 in(9)

    • 0.122 in(93)

    • 0.123 in(9)

    • 0.125 in(184)

    • 0.126 in(175)

    • 0.128 in(133)

    • 0.129 in(49)

    • 0.13 in(9)

    • 0.131 in(40)

    • 0.138 in(175)

    • 0.143 in(84)

    • 0.147 in(25)

    • 0.15 in(24)

    • 0.151 in(25)

    • 0.152 in(49)

    • 0.156 in(84)

    • 0.157 in(130)

    • 0.161 in(4)

    • 0.162 in(4)

    • 0.167 in(126)

    • 0.169 in(84)

    • 0.177 in(126)

    • 0.178 in(84)

    • 0.185 in(106)

    • 0.187 in(4)

    • 0.188 in(126)

    • 0.189 in(126)

    • 0.192 in(40)

    • 0.193 in(44)

    • 0.195 in(84)

    • 0.196 in(84)

    • 0.197 in(51)

    • 0.199 in(2)

    • 0.201 in(2)

    • 0.202 in(44)

    • 0.213 in(42)

    • 0.217 in(42)

    • 0.218 in(4)

    • 0.219 in(42)

    • 0.237 in(49)

    • 0.25 in(53)

    • 0.256 in(42)

    • 0.276 in(7)

    • 0.281 in(11)

    • 0.312 in(11)

    • 0.315 in(4)

    • 0.345 in(7)

    • 0.354 in(7)

    • 0.375 in(11)

    • 0.381 in(7)

    • 0.384 in(4)

    Cutting Width MintoCutting Width Max

    Cutting Width

    Cutting Width

    • 0.5 mm(49)

    • 0.775 mm(49)

    • 0.8 mm(49)

    • 0.9 mm(49)

    • 1.0 mm(133)

    • 1.05 mm(49)

    • 1.201 mm(133)

    • 1.401 mm(49)

    • 1.475 mm(49)

    • 1.5 mm(140)

    • 1.55 mm(1)

    • 1.576 mm(133)

    • 1.6 mm(1)

    • 1.701 mm(49)

    • 1.75 mm(133)

    • 1.826 mm(84)

    • 1.951 mm(49)

    • 1.975 mm(84)

    • 2.0 mm(141)

    • 2.125 mm(8)

    • 2.2 mm(135)

    • 2.225 mm(133)

    • 2.25 mm(93)

    • 2.375 mm(43)

    • 2.401 mm(136)

    • 2.475 mm(87)

    • 2.5 mm(136)

    • 2.625 mm(3)

    • 2.676 mm(84)

    • 2.75 mm(133)

    • 2.801 mm(84)

    • 3.0 mm(184)

    • 3.051 mm(9)

    • 3.1 mm(93)

    • 3.125 mm(9)

    • 3.176 mm(184)

    • 3.2 mm(175)

    • 3.25 mm(133)

    • 3.276 mm(49)

    • 3.301 mm(9)

    • 3.325 mm(40)

    • 3.5 mm(175)

    • 3.6 mm(84)

    • 3.725 mm(25)

    • 3.801 mm(24)

    • 3.825 mm(25)

    • 3.85 mm(49)

    • 3.95 mm(84)

    • 3.975 mm(40)

    • 4.0 mm(130)

    • 4.101 mm(4)

    • 4.125 mm(4)

    • 4.25 mm(126)

    • 4.3 mm(84)

    • 4.5 mm(126)

    • 4.525 mm(84)

    • 4.7 mm(106)

    • 4.75 mm(4)

    • 4.775 mm(126)

    • 4.801 mm(126)

    • 4.875 mm(40)

    • 4.9 mm(44)

    • 4.95 mm(84)

    • 4.976 mm(84)

    • 5.0 mm(51)

    • 5.051 mm(2)

    • 5.101 mm(2)

    • 5.125 mm(44)

    • 5.4 mm(42)

    • 5.5 mm(42)

    • 5.525 mm(4)

    • 5.575 mm(42)

    • 6.0 mm(49)

    • 6.351 mm(53)

    • 6.5 mm(42)

    • 7.0 mm(7)

    • 7.125 mm(11)

    • 7.926 mm(11)

    • 8.0 mm(4)

    • 8.75 mm(7)

    • 9.0 mm(7)

    • 9.525 mm(11)

    • 9.675 mm(7)

    • 9.75 mm(4)

    Cutting Width MintoCutting Width Max

    Front End Type

    Front End Type

    • BKA - Boring Head Adapter (7)

    • BTF - BTF (8)

    • CCS - PSC (13)

    • DLK - DUO-LOCK Modular Connect (133)

    • FDA - Milling Cutter Arbor (595)

    • FLK - Flange Adapter Kenna (5)

    • HSK - Hollow Taper Shank (22)

    • HTS - Deep Hole Index Drill (2)

    • KMM - KM Micro System (38)

    • KMS - KM TBD System (23)

    • KMT - KM Adapter (505)

    • MCS - Modular Cartridge System (67)

    • PMK - Prismatic Adapter Kenna (28)

    • SPK-Holding Arbor-Spindle Head (30)

    • STH - Rotating Adapter Unit (1)

    • SWB - Tap Chuck Adapter (50)

    • SZK - Collet Taper (390)

    • VKT - Square Shank (107)

    • ZYL - Cylindrical Adapter (2337)

    Insert Shape

    Insert Shape

    • C-DIAMOND/RHOMBIC 80 (441)

    • COUNTERBORE/COUNTERSINK MISC (5)

    • D-DIAMOND/RHOMBIC 55 (417)

    • LT-TRIANGLE LAY DOWN THREAD 60 (122)

    • N/K-PARALLELOGRAM 55 (5)

    • ON EDGE MISC (2)

    • PRISMATIC (36)

    • R-ROUND (58)

    • S-SQUARE 90 (182)

    • T-TRIANGLE 60 (131)

    • TN-TOP NOTCH (186)

    • V-DIAMOND/RHOMBIC 35 (165)

    • W-TRIGON 80 (94)

    • X-TRIGON 84 (18)

    Front End Style

    Front End Style

    • BKA01 Intchg Heads (H) Pilot (7)

    • BTF01 Standard BTF (8)

    • CCS01 Std Design (13)

    • DLK01 DUO-LOCK (133)

    • FDA01 Longitudinal Drive (18)

    • FDA02 Transversal Drive (18)

    • FDA03 Longit &Transver Drive (67)

    • FDA12 Transv Drive&CutRetScr (28)

    • FDA13 Long&TranDrv&CutRetScr (10)

    • FDA21 Longit Drive & SHCS (3)

    • FDA22 Transv Drive & SHCS (420)

    • FDA23 Longit&Transv Drv&SHCS (7)

    • FDA42TranDrvw/CtrScrwORBoltCir (24)

    • FLK32FlngMt 3&6Bolt 67&97DBC (5)

    • HSK01 Sm Contact Surf A/C (22)

    • HTS01 Standard HTS Shank (2)

    • KMM01 Std Km-Micro Size (16)

    • KMM02 Enlarged Flange (22)

    • KMS-01 Std KM-TBD NotOnCntr (8)

    • KMS-02 Englarged Flange OnCntr (15)

    • KMT00 All KM, except 02,05,09 (501)

    • KMT09 KM4X 4 ball connection (4)

    • MCS01 Modular Deep Grooving (67)

    • PMK02 Cutoff Sup Bld A1-A3 (20)

    • PMK03 CutOffBld A1-A3 Hlfw/Pin (8)

    • SPK02 Bolt Circ Dia 101.6 mm (30)

    • STH01 Std Design (1)

    • SWB-01 WFL#...WES#(Bilz) (50)

    • SZK02 Collets 8 Degree Taper (356)

    • SZK04 DA Collets (27)

    • SZK06 Tap Collets D-N (7)

    • VKT01 Std Design (107)

    • ZYL01 Straight Shank (1171)

    • ZYL03 Attachment Thread (203)

    • ZYL10 Weldon Shank (403)

    • ZYL13 2Deg-Whistle Notch (179)

    • ZYL14 Weldon+Whistle Notch (26)

    • ZYL21 Squared Drive (93)

    • ZYL22 Boring Bar Shank (102)

    • ZYL28 SAFE-LOCK (59)

    • ZYL33 1 Plain Clamp w/o pcs (13)

    • ZYL56 2Plain Clamp Surf w/Pcs (22)

    • ZYL57 MQL Drill Shank (20)

    • ZYL63 2Deg Surf w/Cyl.w/drive (22)

    • ZYL64 5° WN w/cyl end (24)

    Insert Size

    Insert Size

    • 1 (7)

    • 2 (57)

    • 2B (3)

    • 3 (93)

    • 4 (46)

    • 5 (8)

    • 6 (5)

    Maximum Cutting Depth

    Maximum Cutting Depth

    • 0.0 in(13)

    • 0.119 in(3)

    • 0.125 in(1)

    • 0.138 in(22)

    • 0.177 in(3)

    • 0.209 in(1)

    • 0.21 in(52)

    • 0.294 in(22)

    • 0.299 in(2)

    • 0.354 in(1)

    • 0.404 in(3)

    • 0.416 in(4)

    • 0.433 in(1)

    • 0.473 in(1)

    • 0.531 in(5)

    • 0.551 in(11)

    • 0.572 in(2)

    • 0.63 in(13)

    • 0.748 in(1)

    • 0.787 in(1)

    • 0.984 in(1)

    • 1.102 in(1)

    • 1.299 in(2)

    • 1.581 in(3)

    • 1.974 in(1)

    • 2.368 in(1)

    Maximum Cutting Depth MintoMaximum Cutting Depth Max

    Maximum Cutting Depth

    Maximum Cutting Depth

    • 0.0 mm(13)

    • 3.0 mm(3)

    • 3.176 mm(1)

    • 3.5 mm(22)

    • 4.5 mm(3)

    • 5.301 mm(1)

    • 5.325 mm(52)

    • 7.476 mm(22)

    • 7.601 mm(2)

    • 9.0 mm(1)

    • 10.25 mm(3)

    • 10.55 mm(4)

    • 11.0 mm(1)

    • 12.0 mm(1)

    • 13.5 mm(5)

    • 14.0 mm(11)

    • 14.5 mm(2)

    • 16.0 mm(13)

    • 19.0 mm(1)

    • 20.0 mm(1)

    • 25.0 mm(1)

    • 28.0 mm(1)

    • 33.0 mm(2)

    • 40.151 mm(3)

    • 50.151 mm(1)

    • 60.151 mm(1)

    Maximum Cutting Depth MintoMaximum Cutting Depth Max

    Gage Length

    Gage Length

    • 4 in(151)

    • 6 in(125)

    • 2 in(40)

    • 8 in(31)

    • 3 in(28)

    • 5 in(19)

    • 10 in(10)

    • 7 in(8)

    • 13 in(7)

    • 9 in(6)

    • 1 in(3)

    • 14 in(1)

    • 17 in(1)

    • 8500 in(1)

    • 0.189 in(6)

    • 0.276 in(36)

    • 0.295 in(1)

    • 0.394 in(1)

    • 0.433 in(35)

    • 0.473 in(4)

    • 0.492 in(1)

    • 0.5 in(1)

    • 0.551 in(35)

    • 0.591 in(2)

    • 0.63 in(14)

    • 0.669 in(1)

    • 0.709 in(1)

    • 0.728 in(1)

    • 0.75 in(2)

    • 0.787 in(10)

    • 0.866 in(14)

    • 0.906 in(8)

    • 0.921 in(2)

    • 0.946 in(1)

    • 0.984 in(35)

    • 1.024 in(12)

    • 1.063 in(6)

    • 1.102 in(14)

    • 1.113 in(2)

    • 1.18 in(4)

    • 1.181 in(37)

    • 1.22 in(1)

    • 1.238 in(1)

    • 1.26 in(24)

    • 1.299 in(2)

    • 1.339 in(1)

    • 1.375 in(2)

    • 1.379 in(27)

    • 1.381 in(5)

    • 1.385 in(2)

    • 1.389 in(4)

    • 1.417 in(2)

    • 1.429 in(1)

    • 1.457 in(2)

    • 1.48 in(4)

    • 1.496 in(11)

    • 1.5 in(9)

    • 1.532 in(2)

    • 1.571 in(2)

    • 1.575 in(53)

    • 1.581 in(1)

    • 1.614 in(4)

    • 1.62 in(3)

    • 1.625 in(1)

    • 1.655 in(2)

    • 1.661 in(1)

    • 1.693 in(8)

    • 1.75 in(11)

    • 1.77 in(10)

    • 1.772 in(37)

    • 1.774 in(1)

    • 1.782 in(2)

    • 1.795 in(1)

    • 1.809 in(1)

    • 1.811 in(1)

    • 1.831 in(2)

    • 1.846 in(4)

    • 1.85 in(12)

    • 1.875 in(1)

    • 1.891 in(7)

    • 1.901 in(1)

    • 1.929 in(4)

    • 1.937 in(2)

    • 1.969 in(87)

    • 1.971 in(1)

    • 1.98 in(2)

    • 2.008 in(2)

    • 2.047 in(3)

    • 2.06 in(2)

    • 2.071 in(3)

    • 2.087 in(2)

    • 2.106 in(4)

    • 2.12 in(1)

    • 2.146 in(2)

    • 2.165 in(54)

    • 2.177 in(4)

    • 2.185 in(2)

    • 2.205 in(4)

    • 2.244 in(10)

    • 2.25 in(32)

    • 2.255 in(2)

    • 2.281 in(4)

    • 2.283 in(13)

    • 2.299 in(1)

    • 2.303 in(7)

    • 2.323 in(16)

    • 2.343 in(2)

    • 2.358 in(1)

    • 2.36 in(4)

    • 2.362 in(167)

    • 2.368 in(1)

    • 2.38 in(1)

    • 2.382 in(1)

    • 2.4 in(3)

    • 2.402 in(1)

    • 2.41 in(1)

    • 2.433 in(1)

    • 2.44 in(3)

    • 2.451 in(1)

    • 2.48 in(42)

    • 2.5 in(62)

    • 2.551 in(6)

    • 2.559 in(78)

    • 2.571 in(2)

    • 2.598 in(1)

    • 2.6 in(2)

    • 2.618 in(4)

    • 2.62 in(2)

    • 2.625 in(1)

    • 2.638 in(5)

    • 2.64 in(2)

    • 2.648 in(1)

    • 2.66 in(1)

    • 2.677 in(2)

    • 2.697 in(2)

    • 2.717 in(2)

    • 2.73 in(1)

    • 2.737 in(1)

    • 2.75 in(23)

    • 2.753 in(1)

    • 2.757 in(127)

    • 2.758 in(1)

    • 2.835 in(12)

    • 2.874 in(1)

    • 2.875 in(5)

    • 2.882 in(1)

    • 2.894 in(2)

    • 2.9 in(1)

    • 2.914 in(4)

    • 2.926 in(2)

    • 2.953 in(92)

    • 2.955 in(1)

    • 2.956 in(1)

    • 3.003 in(2)

    • 3.016 in(1)

    • 3.031 in(5)

    • 3.055 in(1)

    • 3.071 in(11)

    • 3.098 in(1)

    • 3.122 in(1)

    • 3.123 in(1)

    • 3.15 in(286)

    • 3.156 in(1)

    • 3.189 in(1)

    • 3.209 in(1)

    • 3.228 in(11)

    • 3.25 in(14)

    • 3.307 in(15)

    • 3.337 in(1)

    • 3.346 in(98)

    • 3.347 in(1)

    • 3.35 in(2)

    • 3.375 in(1)

    • 3.38 in(3)

    • 3.406 in(2)

    • 3.426 in(18)

    • 3.43 in(2)

    • 3.446 in(1)

    • 3.465 in(2)

    • 3.484 in(2)

    • 3.5 in(52)

    • 3.504 in(4)

    • 3.516 in(1)

    • 3.543 in(188)

    • 3.547 in(1)

    • 3.579 in(1)

    • 3.583 in(1)

    • 3.622 in(4)

    • 3.701 in(1)

    • 3.72 in(2)

    • 3.74 in(74)

    • 3.75 in(47)

    • 3.819 in(6)

    • 3.855 in(1)

    • 3.858 in(11)

    • 3.874 in(1)

    • 3.88 in(2)

    • 3.894 in(1)

    • 3.902 in(1)

    • 3.918 in(1)

    • 3.919 in(1)

    • 3.922 in(1)

    • 3.93 in(1)

    • 3.934 in(1)

    • 3.938 in(305)

    • 3.95 in(1)

    • 4.016 in(1)

    • 4.029 in(2)

    • 4.031 in(4)

    • 4.083 in(1)

    • 4.118 in(2)

    • 4.134 in(60)

    • 4.158 in(1)

    • 4.17 in(1)

    • 4.202 in(1)

    • 4.21 in(2)

    • 4.213 in(5)

    • 4.25 in(16)

    • 4.252 in(2)

    • 4.258 in(1)

    • 4.264 in(1)

    • 4.291 in(17)

    • 4.331 in(50)

    • 4.337 in(1)

    • 4.366 in(1)

    • 4.375 in(1)

    • 4.409 in(1)

    • 4.425 in(5)

    • 4.429 in(2)

    • 4.488 in(2)

    • 4.492 in(1)

    • 4.5 in(39)

    • 4.529 in(34)

    • 4.532 in(1)

    • 4.601 in(1)

    • 4.604 in(1)

    • 4.606 in(6)

    • 4.62 in(3)

    • 4.625 in(8)

    • 4.626 in(1)

    • 4.638 in(2)

    • 4.646 in(2)

    • 4.665 in(1)

    • 4.681 in(1)

    • 4.705 in(1)

    • 4.724 in(170)

    • 4.75 in(7)

    • 4.803 in(2)

    • 4.811 in(1)

    • 4.815 in(1)

    • 4.819 in(2)

    • 4.874 in(2)

    • 4.876 in(1)

    • 4.882 in(2)

    • 4.921 in(12)

    • 4.961 in(1)

    • 4.968 in(1)

    • 4.98 in(1)

    • 5.037 in(1)

    • 5.039 in(1)

    • 5.118 in(25)

    • 5.155 in(1)

    • 5.157 in(2)

    • 5.197 in(2)

    • 5.236 in(2)

    • 5.258 in(1)

    • 5.276 in(11)

    • 5.287 in(1)

    • 5.295 in(1)

    • 5.297 in(2)

    • 5.313 in(1)

    • 5.315 in(7)

    • 5.337 in(1)

    • 5.351 in(2)

    • 5.39 in(2)

    • 5.394 in(6)

    • 5.472 in(1)

    • 5.492 in(4)

    • 5.5 in(15)

    • 5.513 in(20)

    • 5.551 in(1)

    • 5.571 in(2)

    • 5.591 in(4)

    • 5.604 in(1)

    • 5.62 in(2)

    • 5.67 in(2)

    • 5.691 in(2)

    • 5.748 in(2)

    • 5.75 in(6)

    • 5.787 in(1)

    • 5.827 in(1)

    • 5.906 in(125)

    • 5.965 in(1)

    • 5.968 in(1)

    • 6.016 in(1)

    • 6.037 in(1)

    • 6.063 in(1)

    • 6.102 in(4)

    • 6.142 in(2)

    • 6.25 in(4)

    • 6.258 in(1)

    • 6.299 in(171)

    • 6.3 in(1)

    • 6.337 in(1)

    • 6.496 in(9)

    • 6.5 in(7)

    • 6.53 in(1)

    • 6.601 in(1)

    • 6.604 in(1)

    • 6.614 in(1)

    • 6.62 in(3)

    • 6.692 in(1)

    • 6.694 in(59)

    • 6.811 in(2)

    • 6.891 in(4)

    • 6.968 in(1)

    • 7.037 in(1)

    • 7.087 in(1)

    • 7.125 in(1)

    • 7.126 in(4)

    • 7.146 in(1)

    • 7.165 in(1)

    • 7.188 in(1)

    • 7.258 in(1)

    • 7.313 in(1)

    • 7.323 in(1)

    • 7.337 in(1)

    • 7.36 in(2)

    • 7.362 in(7)

    • 7.48 in(3)

    • 7.5 in(6)

    • 7.559 in(1)

    • 7.604 in(1)

    • 7.62 in(1)

    • 7.688 in(1)

    • 7.75 in(3)

    • 7.875 in(65)

    • 7.968 in(1)

    • 7.992 in(1)

    • 8.037 in(1)

    • 8.11 in(2)

    • 8.162 in(1)

    • 8.259 in(1)

    • 8.268 in(3)

    • 8.371 in(1)

    • 8.5 in(2)

    • 8.605 in(1)

    • 8.661 in(2)

    • 8.968 in(1)

    • 9.037 in(1)

    • 9.055 in(1)

    • 9.094 in(2)

    • 9.214 in(1)

    • 9.234 in(3)

    • 9.33 in(1)

    • 9.331 in(4)

    • 9.589 in(1)

    • 9.621 in(1)

    • 9.843 in(7)

    • 10.236 in(13)

    • 10.468 in(1)

    • 10.5 in(12)

    • 11.161 in(1)

    • 11.468 in(1)

    • 11.811 in(3)

    • 12.205 in(2)

    • 12.233 in(3)

    • 12.5 in(7)

    • 12.598 in(5)

    • 12.992 in(4)

    • 13.161 in(1)

    • 13.781 in(1)

    • 14.162 in(1)

    • 14.233 in(3)

    • 15.161 in(1)

    • 15.233 in(3)

    • 16.233 in(2)

    • 17.717 in(1)

    • 19.162 in(1)

    • 20.233 in(3)

    Gage Length

    Gage Length

    • 100 mm(305)

    • 80 mm(286)

    • 90 mm(188)

    • 160 mm(171)

    • 120 mm(170)

    • 60 mm(167)

    • 70 mm(127)

    • 150 mm(125)

    • 85 mm(98)

    • 75 mm(92)

    • 50 mm(87)

    • 65 mm(78)

    • 95 mm(74)

    • 200 mm(65)

    • 105 mm(60)

    • 170 mm(59)

    • 55 mm(54)

    • 40 mm(53)

    • 110 mm(50)

    • 63 mm(42)

    • 30 mm(37)

    • 45 mm(37)

    • 7 mm(36)

    • 11 mm(35)

    • 14 mm(35)

    • 25 mm(35)

    • 115 mm(34)

    • 35 mm(27)

    • 130 mm(25)

    • 32 mm(24)

    • 140 mm(20)

    • 127 mm(19)

    • 87 mm(18)

    • 109 mm(17)

    • 59 mm(16)

    • 84 mm(15)

    • 16 mm(14)

    • 22 mm(14)

    • 28 mm(14)

    • 260 mm(13)

    • 58 mm(13)

    • 125 mm(12)

    • 26 mm(12)

    • 47 mm(12)

    • 72 mm(12)

    • 134 mm(11)

    • 38 mm(11)

    • 78 mm(11)

    • 82 mm(11)

    • 98 mm(11)

    • 20 mm(10)

    • 254 mm(10)

    • 57 mm(10)

    • 165 mm(9)

    • 23 mm(8)

    • 43 mm(8)

    • 135 mm(7)

    • 187 mm(7)

    • 250 mm(7)

    • 48 mm(7)

    • 117 mm(6)

    • 137 mm(6)

    • 27 mm(6)

    • 97 mm(6)

    • 107 mm(5)

    • 320 mm(5)

    • 67 mm(5)

    • 77 mm(5)

    • 12 mm(4)

    • 142 mm(4)

    • 155 mm(4)

    • 175 mm(4)

    • 181 mm(4)

    • 237 mm(4)

    • 330 mm(4)

    • 41 mm(4)

    • 49 mm(4)

    • 56 mm(4)

    • 74 mm(4)

    • 89 mm(4)

    • 92 mm(4)

    • 190 mm(3)

    • 210 mm(3)

    • 300 mm(3)

    • 52 mm(3)

    • 108 mm(2)

    • 114 mm(2)

    • 118 mm(2)

    • 122 mm(2)

    • 124 mm(2)

    • 131 mm(2)

    • 132 mm(2)

    • 133 mm(2)

    • 144 mm(2)

    • 146 mm(2)

    • 15 mm(2)

    • 156 mm(2)

    • 206 mm(2)

    • 220 mm(2)

    • 231 mm(2)

    • 310 mm(2)

    • 33 mm(2)

    • 36 mm(2)

    • 37 mm(2)

    • 42 mm(2)

    • 51 mm(2)

    • 53 mm(2)

    • 68 mm(2)

    • 69 mm(2)

    • 88 mm(2)

    • 10 mm(1)

    • 102 mm(1)

    • 112 mm(1)

    • 126 mm(1)

    • 128 mm(1)

    • 139 mm(1)

    • 141 mm(1)

    • 147 mm(1)

    • 148 mm(1)

    • 154 mm(1)

    • 168 mm(1)

    • 17 mm(1)

    • 173 mm(1)

    • 18 mm(1)

    • 180 mm(1)

    • 182 mm(1)

    • 186 mm(1)

    • 192 mm(1)

    • 203 mm(1)

    • 215900 mm(1)

    • 230 mm(1)

    • 234 mm(1)

    • 24 mm(1)

    • 31 mm(1)

    • 34 mm(1)

    • 350 mm(1)

    • 450 mm(1)

    • 46 mm(1)

    • 61 mm(1)

    • 66 mm(1)

    • 73 mm(1)

    • 81 mm(1)

    • 91 mm(1)

    • 94 mm(1)

    • 4.801 mm(6)

    • 7.5 mm(1)

    • 12.5 mm(1)

    • 12.701 mm(1)

    • 18.5 mm(1)

    • 19.05 mm(2)

    • 23.401 mm(2)

    • 25.401 mm(3)

    • 28.276 mm(2)

    • 29.975 mm(4)

    • 31.451 mm(1)

    • 34.926 mm(2)

    • 35.051 mm(5)

    • 35.176 mm(2)

    • 35.25 mm(4)

    • 36.301 mm(1)

    • 37.6 mm(4)

    • 38.1 mm(9)

    • 38.901 mm(2)

    • 39.901 mm(2)

    • 40.151 mm(1)

    • 41.151 mm(3)

    • 41.276 mm(1)

    • 42.176 mm(1)

    • 44.45 mm(11)

    • 44.95 mm(10)

    • 45.051 mm(1)

    • 45.25 mm(2)

    • 45.6 mm(1)

    • 45.95 mm(1)

    • 46.5 mm(2)

    • 46.901 mm(4)

    • 47.625 mm(1)

    • 48.25 mm(1)

    • 49.2 mm(2)

    • 50.051 mm(1)

    • 50.301 mm(2)

    • 50.801 mm(40)

    • 52.325 mm(2)

    • 52.6 mm(3)

    • 53.5 mm(4)

    • 53.85 mm(1)

    • 54.5 mm(2)

    • 55.301 mm(4)

    • 55.5 mm(2)

    • 57.151 mm(32)

    • 57.276 mm(2)

    • 57.901 mm(4)

    • 58.401 mm(1)

    • 58.5 mm(7)

    • 59.5 mm(2)

    • 59.901 mm(1)

    • 59.95 mm(4)

    • 60.151 mm(1)

    • 60.45 mm(1)

    • 60.5 mm(1)

    • 60.95 mm(3)

    • 61.225 mm(1)

    • 61.801 mm(1)

    • 61.975 mm(3)

    • 62.25 mm(1)

    • 63.5 mm(62)

    • 64.775 mm(6)

    • 65.3 mm(2)

    • 66.05 mm(2)

    • 66.5 mm(4)

    • 66.55 mm(2)

    • 66.675 mm(1)

    • 67.05 mm(2)

    • 67.226 mm(1)

    • 67.55 mm(1)

    • 68.5 mm(2)

    • 69.351 mm(1)

    • 69.525 mm(1)

    • 69.851 mm(23)

    • 69.9 mm(1)

    • 70.05 mm(1)

    • 73.025 mm(5)

    • 73.2 mm(1)

    • 73.5 mm(2)

    • 73.65 mm(1)

    • 74.3 mm(2)

    • 75.05 mm(1)

    • 75.075 mm(1)

    • 76.2 mm(28)

    • 76.25 mm(2)

    • 76.601 mm(1)

    • 77.601 mm(1)

    • 78.7 mm(1)

    • 79.301 mm(1)

    • 79.325 mm(1)

    • 80.15 mm(1)

    • 81.5 mm(1)

    • 82.551 mm(14)

    • 84.75 mm(1)

    • 85.025 mm(1)

    • 85.101 mm(2)

    • 85.726 mm(1)

    • 85.851 mm(3)

    • 86.5 mm(2)

    • 87.125 mm(2)

    • 87.5 mm(1)

    • 88.5 mm(2)

    • 88.9 mm(52)

    • 89.301 mm(1)

    • 90.101 mm(1)

    • 90.9 mm(1)

    • 94.5 mm(2)

    • 95.25 mm(47)

    • 97.926 mm(1)

    • 98.4 mm(1)

    • 98.551 mm(2)

    • 98.9 mm(1)

    • 99.101 mm(1)

    • 99.5 mm(1)

    • 99.551 mm(1)

    • 99.601 mm(1)

    • 99.801 mm(1)

    • 99.9 mm(1)

    • 100.301 mm(1)

    • 101.601 mm(151)

    • 102.301 mm(2)

    • 102.4 mm(4)

    • 103.7 mm(1)

    • 104.601 mm(2)

    • 105.601 mm(1)

    • 105.9 mm(1)

    • 106.7 mm(1)

    • 106.926 mm(2)

    • 107.95 mm(16)

    • 108.15 mm(1)

    • 108.301 mm(1)

    • 110.15 mm(1)

    • 110.9 mm(1)

    • 111.125 mm(1)

    • 112.4 mm(5)

    • 112.5 mm(2)

    • 114.101 mm(1)

    • 114.301 mm(39)

    • 115.101 mm(1)

    • 116.851 mm(1)

    • 116.95 mm(1)

    • 117.351 mm(3)

    • 117.476 mm(8)

    • 117.5 mm(1)

    • 117.801 mm(2)

    • 118.5 mm(1)

    • 118.9 mm(1)

    • 119.5 mm(1)

    • 120.65 mm(7)

    • 122.176 mm(1)

    • 122.301 mm(1)

    • 122.4 mm(2)

    • 123.801 mm(2)

    • 123.851 mm(1)

    • 126.176 mm(1)

    • 126.5 mm(1)

    • 127.95 mm(1)

    • 130.925 mm(1)

    • 133.55 mm(1)

    • 134.3 mm(1)

    • 134.5 mm(1)

    • 134.55 mm(2)

    • 134.951 mm(1)

    • 135.55 mm(1)

    • 135.9 mm(2)

    • 136.9 mm(2)

    • 139.5 mm(4)

    • 139.701 mm(15)

    • 141.5 mm(2)

    • 142.35 mm(1)

    • 142.75 mm(2)

    • 144.55 mm(2)

    • 146.05 mm(6)

    • 151.5 mm(1)

    • 151.576 mm(1)

    • 152.4 mm(125)

    • 152.8 mm(1)

    • 153.35 mm(1)

    • 158.75 mm(4)

    • 158.951 mm(1)

    • 160.025 mm(1)

    • 160.951 mm(1)

    • 165.101 mm(7)

    • 165.851 mm(1)

    • 167.65 mm(1)

    • 167.75 mm(1)

    • 168.15 mm(3)

    • 169.976 mm(1)

    • 172.976 mm(1)

    • 176.976 mm(1)

    • 177.8 mm(8)

    • 178.75 mm(1)

    • 180.976 mm(1)

    • 181.5 mm(1)

    • 182.576 mm(1)

    • 184.351 mm(1)

    • 185.75 mm(1)

    • 186.351 mm(1)

    • 186.951 mm(2)

    • 190.5 mm(6)

    • 193.15 mm(1)

    • 193.55 mm(1)

    • 195.275 mm(1)

    • 196.851 mm(3)

    • 202.375 mm(1)

    • 203.201 mm(31)

    • 204.15 mm(1)

    • 207.326 mm(1)

    • 209.75 mm(1)

    • 212.601 mm(1)

    • 215.9 mm(2)

    • 218.55 mm(1)

    • 227.775 mm(1)

    • 228.601 mm(6)

    • 229.55 mm(1)

    • 234.55 mm(3)

    • 236.976 mm(1)

    • 243.55 mm(1)

    • 244.351 mm(1)

    • 265.875 mm(1)

    • 266.7 mm(12)

    • 283.5 mm(1)

    • 291.276 mm(1)

    • 310.701 mm(3)

    • 317.5 mm(7)

    • 330.201 mm(7)

    • 334.3 mm(1)

    • 355.6 mm(1)

    • 359.725 mm(1)

    • 361.526 mm(3)

    • 385.1 mm(1)

    • 386.925 mm(3)

    • 412.326 mm(2)

    • 431.8 mm(1)

    • 486.725 mm(1)

    • 513.926 mm(3)

    Front End Size

    Front End Size

    • 0.02 in(4)

    • 0.039 in(7)

    • 0.089 in(1)

    • 0.098 in(2)

    • 0.11 in(2)

    • 0.119 in(8)

    • 0.124 in(1)

    • 0.125 in(5)

    • 0.138 in(1)

    • 0.14 in(1)

    • 0.142 in(1)

    • 0.157 in(9)

    • 0.168 in(1)

    • 0.177 in(4)

    • 0.188 in(9)

    • 0.194 in(1)

    • 0.197 in(7)

    • 0.221 in(2)

    • 0.237 in(119)

    • 0.248 in(2)

    • 0.25 in(57)

    • 0.255 in(1)

    • 0.276 in(2)

    • 0.28 in(2)

    • 0.311 in(1)

    • 0.312 in(1)

    • 0.313 in(31)

    • 0.315 in(121)

    • 0.318 in(2)

    • 0.323 in(2)

    • 0.354 in(4)

    • 0.367 in(2)

    • 0.374 in(2)

    • 0.375 in(70)

    • 0.376 in(1)

    • 0.381 in(2)

    • 0.386 in(3)

    • 0.394 in(124)

    • 0.429 in(2)

    • 0.433 in(3)

    • 0.437 in(7)

    • 0.438 in(9)

    • 0.441 in(2)

    • 0.473 in(145)

    • 0.48 in(1)

    • 0.492 in(1)

    • 0.5 in(121)

    • 0.512 in(11)

    • 0.539 in(4)

    • 0.542 in(1)

    • 0.551 in(95)

    • 0.562 in(2)

    • 0.564 in(3)

    • 0.591 in(1)

    • 0.622 in(2)

    • 0.625 in(77)

    • 0.626 in(1)

    • 0.63 in(202)

    • 0.652 in(2)

    • 0.687 in(2)

    • 0.698 in(2)

    • 0.701 in(1)

    • 0.709 in(94)

    • 0.748 in(19)

    • 0.749 in(2)

    • 0.75 in(197)

    • 0.752 in(1)

    • 0.76 in(1)

    • 0.787 in(172)

    • 0.794 in(1)

    • 0.8 in(1)

    • 0.828 in(14)

    • 0.866 in(83)

    • 0.875 in(14)

    • 0.882 in(1)

    • 0.896 in(1)

    • 0.907 in(1)

    • 0.946 in(4)

    • 0.984 in(122)

    • 1.0 in(197)

    • 1.022 in(1)

    • 1.035 in(2)

    • 1.063 in(63)

    • 1.102 in(1)

    • 1.108 in(1)

    • 1.125 in(1)

    • 1.141 in(2)

    • 1.143 in(6)

    • 1.22 in(18)

    • 1.221 in(2)

    • 1.248 in(7)

    • 1.25 in(138)

    • 1.252 in(1)

    • 1.26 in(261)

    • 1.5 in(76)

    • 1.575 in(256)

    • 1.75 in(2)

    • 1.891 in(10)

    • 1.969 in(172)

    • 2.0 in(47)

    • 2.362 in(11)

    • 2.48 in(92)

    • 2.5 in(18)

    • 3.15 in(21)

    • 3.938 in(4)

    • 40.0 in(9)

    Front End Size MintoFront End Size Max

    Front End Size

    Front End Size

    • 0.5 mm(4)

    • 1.0 mm(7)

    • 2.25 mm(1)

    • 2.5 mm(2)

    • 2.801 mm(2)

    • 3.0 mm(8)

    • 3.151 mm(1)

    • 3.176 mm(5)

    • 3.5 mm(1)

    • 3.551 mm(1)

    • 3.575 mm(1)

    • 4.0 mm(9)

    • 4.275 mm(1)

    • 4.5 mm(4)

    • 4.775 mm(9)

    • 4.926 mm(1)

    • 5.0 mm(7)

    • 5.601 mm(2)

    • 6.0 mm(119)

    • 6.301 mm(2)

    • 6.351 mm(57)

    • 6.476 mm(1)

    • 7.0 mm(2)

    • 7.101 mm(2)

    • 7.9 mm(1)

    • 7.926 mm(1)

    • 7.95 mm(31)

    • 8.0 mm(121)

    • 8.076 mm(2)

    • 8.201 mm(2)

    • 9.0 mm(4)

    • 9.326 mm(2)

    • 9.5 mm(2)

    • 9.525 mm(70)

    • 9.55 mm(1)

    • 9.675 mm(2)

    • 9.8 mm(3)

    • 10.0 mm(124)

    • 10.9 mm(2)

    • 11.0 mm(3)

    • 11.101 mm(7)

    • 11.125 mm(9)

    • 11.201 mm(2)

    • 12.0 mm(145)

    • 12.201 mm(1)

    • 12.5 mm(1)

    • 12.701 mm(121)

    • 13.0 mm(11)

    • 13.701 mm(4)

    • 13.775 mm(1)

    • 14.0 mm(95)

    • 14.275 mm(2)

    • 14.3 mm(3)

    • 15.0 mm(1)

    • 15.8 mm(2)

    • 15.875 mm(77)

    • 15.9 mm(1)

    • 16.0 mm(202)

    • 16.55 mm(2)

    • 17.45 mm(2)

    • 17.7 mm(2)

    • 17.776 mm(1)

    • 18.0 mm(94)

    • 19.0 mm(19)

    • 19.026 mm(2)

    • 19.05 mm(197)

    • 19.1 mm(1)

    • 19.3 mm(1)

    • 20.0 mm(172)

    • 20.175 mm(1)

    • 20.326 mm(1)

    • 21.0 mm(14)

    • 22.0 mm(83)

    • 22.225 mm(14)

    • 22.401 mm(1)

    • 22.75 mm(1)

    • 23.026 mm(1)

    • 24.0 mm(4)

    • 25.0 mm(122)

    • 25.401 mm(197)

    • 25.925 mm(1)

    • 26.3 mm(2)

    • 27.0 mm(63)

    • 28.0 mm(1)

    • 28.151 mm(1)

    • 28.576 mm(1)

    • 28.975 mm(2)

    • 29.0 mm(6)

    • 31.0 mm(18)

    • 31.026 mm(2)

    • 31.701 mm(7)

    • 31.75 mm(138)

    • 31.8 mm(1)

    • 32.0 mm(261)

    • 38.1 mm(76)

    • 40.0 mm(256)

    • 44.45 mm(2)

    • 48.0 mm(10)

    • 50.0 mm(172)

    • 50.801 mm(47)

    • 60.0 mm(11)

    • 63.0 mm(92)

    • 63.5 mm(18)

    • 80.0 mm(21)

    • 100.0 mm(4)

    • 1016.0 mm(9)

    Front End Size MintoFront End Size Max

    Insert Geometry

    Shape

    Shape

    • COUNTERBORE/COUNTERSINK MISC (2)

    Cutting Tool Material

    Cutting Tool Material

    • B H (1230)

    • B L (1177)

    • C A (996)

    • C N (1145)

    • D P (1088)

    • H T (1399)

    • H W (1791)

    Back-End

    Connection Type

    Connection Type

    • CYLINDRICAL (3)

    • Cutoff Blade (3)

    • TAPER SHANK (1238)

    System Size

    System Size

    • BT30 (79)

    • BT40 (223)

    • BT50 (200)

    • BTF46 (33)

    • BTKV30 (15)

    • BTKV40 (64)

    • BTKV50 (53)

    • CV40 (228)

    • CV50 (303)

    • CV50F (1)

    • CV60F (1)

    • CVKV40 (75)

    • CVKV50 (80)

    • DV40 (171)

    • DV50 (172)

    • HSK100A (222)

    • HSK100T (4)

    • HSK125A (58)

    • HSK32C (5)

    • HSK40A (55)

    • HSK40C (8)

    • HSK50A (46)

    • HSK50C (10)

    • HSK63A (255)

    • HSK63C (11)

    • HSK63T (3)

    • HSK80A (57)

    • HSK80F PIN (8)

    • KM12 (36)

    • KM16 (73)

    • KM1612 (1)

    • KM20 (52)

    • KM2016 (17)

    • KM25 (76)

    • KM32 (57)

    • KM3225 (47)

    • KM32TS (24)

    • KM40TS (276)

    • KM4X100 (182)

    • KM4X63 (288)

    • KM50 (11)

    • KM50TS (264)

    • KM63TS (304)

    • KM63UT (1)

    • KM63XMZ (159)

    • KM80 (5)

    • KM80ATC (108)

    • KM80TS (113)

    • PSC50 (82)

    • PSC63 (173)

    • PSC80 (6)

    • SS100 (1)

    • SS125 (2)

    • SS150 (1)

    • VDI30 (16)

    • VDI40 (48)

    • VDI50 (32)

    • VDI60 (10)

    Back-End Diameter

    Back-End Diameter

    • 8.0 mm(1)

    • 9.525 mm(3)

    • 10.0 mm(6)

    • 12.0 mm(54)

    • 12.5 mm(2)

    • 12.701 mm(25)

    • 13.0 mm(1)

    • 14.0 mm(1)

    • 15.875 mm(13)

    • 16.0 mm(93)

    • 17.0 mm(1)

    • 18.0 mm(3)

    • 19.0 mm(39)

    • 19.05 mm(65)

    • 20.0 mm(144)

    • 21.0 mm(6)

    • 22.0 mm(1)

    • 24.0 mm(1)

    • 25.0 mm(109)

    • 25.401 mm(42)

    • 29.0 mm(4)

    • 30.0 mm(16)

    • 31.0 mm(35)

    • 31.701 mm(1)

    • 31.75 mm(154)

    • 32.0 mm(211)

    • 38.1 mm(16)

    • 40.0 mm(546)

    • 41.276 mm(4)

    • 44.0 mm(2)

    • 44.45 mm(738)

    • 44.75 mm(6)

    • 46.026 mm(31)

    • 47.0 mm(2)

    • 48.0 mm(22)

    • 49.975 mm(1)

    • 50.0 mm(662)

    • 50.801 mm(11)

    • 51.0 mm(1)

    • 55.0 mm(8)

    • 58.301 mm(2)

    • 59.901 mm(18)

    • 60.0 mm(34)

    • 60.325 mm(5)

    • 61.95 mm(2)

    • 62.0 mm(2)

    • 62.975 mm(2)

    • 63.0 mm(1476)

    • 63.5 mm(7)

    • 65.0 mm(6)

    • 68.0 mm(8)

    • 68.976 mm(1)

    • 69.851 mm(782)

    • 71.95 mm(1)

    • 74.0 mm(2)

    • 76.2 mm(2)

    • 77.95 mm(1)

    • 80.0 mm(353)

    • 85.0 mm(2)

    • 92.0 mm(1)

    • 100.0 mm(438)

    • 103.976 mm(1)

    • 107.95 mm(1)

    • 108.025 mm(2)

    • 125.0 mm(58)

    • 150.0 mm(2)

    Back-End Diameter MintoBack-End Diameter Max

    Back-End Diameter

    Back-End Diameter

    • 0.315 in(1)

    • 0.375 in(3)

    • 0.394 in(6)

    • 0.473 in(54)

    • 0.492 in(2)

    • 0.5 in(25)

    • 0.512 in(1)

    • 0.551 in(1)

    • 0.625 in(13)

    • 0.63 in(93)

    • 0.669 in(1)

    • 0.709 in(3)

    • 0.748 in(39)

    • 0.75 in(65)

    • 0.787 in(144)

    • 0.828 in(6)

    • 0.866 in(1)

    • 0.946 in(1)

    • 0.984 in(109)

    • 1.0 in(42)

    • 1.143 in(4)

    • 1.181 in(16)

    • 1.22 in(35)

    • 1.248 in(1)

    • 1.25 in(154)

    • 1.26 in(211)

    • 1.5 in(16)

    • 1.575 in(546)

    • 1.625 in(4)

    • 1.732 in(2)

    • 1.75 in(738)

    • 1.762 in(6)

    • 1.812 in(31)

    • 1.85 in(2)

    • 1.891 in(22)

    • 1.968 in(1)

    • 1.969 in(662)

    • 2.0 in(11)

    • 2.008 in(1)

    • 2.165 in(8)

    • 2.295 in(2)

    • 2.358 in(18)

    • 2.362 in(34)

    • 2.375 in(5)

    • 2.439 in(2)

    • 2.441 in(2)

    • 2.479 in(2)

    • 2.48 in(1476)

    • 2.5 in(7)

    • 2.559 in(6)

    • 2.677 in(8)

    • 2.716 in(1)

    • 2.75 in(782)

    • 2.833 in(1)

    • 2.914 in(2)

    • 3.0 in(2)

    • 3.069 in(1)

    • 3.15 in(353)

    • 3.346 in(2)

    • 3.622 in(1)

    • 3.938 in(438)

    • 4.094 in(1)

    • 4.25 in(1)

    • 4.253 in(2)

    • 4.921 in(58)

    • 5.906 in(2)

    Back-End Diameter MintoBack-End Diameter Max

    Shank Height

    Shank Height

    • 0.0 in(4)

    • 0.748 in(3)

    Shank Height MintoShank Height Max

    Shank Height

    Shank Height

    • 0.0 mm(4)

    • 19.0 mm(3)

    Shank Height MintoShank Height Max

    Shank Width

    Shank Width

    • 0.072 in(3)

    Shank Width MintoShank Width Max

    Shank Width

    Shank Width

    • 1.8 mm(3)

    Shank Width MintoShank Width Max

    No filters matching ""

    Tool Holders & Adapters - Kennametal (2024)

    References

    Top Articles
    Latest Posts
    Recommended Articles
    Article information

    Author: Saturnina Altenwerth DVM

    Last Updated:

    Views: 6578

    Rating: 4.3 / 5 (44 voted)

    Reviews: 91% of readers found this page helpful

    Author information

    Name: Saturnina Altenwerth DVM

    Birthday: 1992-08-21

    Address: Apt. 237 662 Haag Mills, East Verenaport, MO 57071-5493

    Phone: +331850833384

    Job: District Real-Estate Architect

    Hobby: Skateboarding, Taxidermy, Air sports, Painting, Knife making, Letterboxing, Inline skating

    Introduction: My name is Saturnina Altenwerth DVM, I am a witty, perfect, combative, beautiful, determined, fancy, determined person who loves writing and wants to share my knowledge and understanding with you.